|
Here's our Tip for.. March 25, 2003
Click Here to see a complete list of all of our previously released Tips!
If you're about to install Windows NT 4.0 on a computer, check to make sure how the hard disk is set up. If the disk drive exceeds 1024 cylinders (most do these days) make sure you format and partition the disk with LBA enabled.
You can have some serious problems if LBA is applied to a disk formatted when LBA was disabled. You'll most likely get a Stop error telling you that the boot device is not accessible.
If this happens to you after you've been running a hard disk for a while, the problem is more likely to be a corrupt partition boot sector.
|